heat pipe

Leader Energy's Heat Pipe Type

Master of heat transfer heat pipe

1. Nano heat pipe (Patent 10-1513294)

This is the most commonly used heat pipe.

◎Mainly used for home heating and bed heating, the diameter is 15.88Φ

The length can be made arbitrarily, but the efficiency is suitable for less than 2m.

2. Fin type heat pipe

To increase the efficiency of heat dissipation, the fins are pulled out of the heat pipe to raise the fins

Increases the volume of the surface in contact with air and is integrated with the heat pipe.

Efficiency is doubled due to good heat transfer

◎It is used for hot air fan, facility heating, drying room, mattress heating system, cooling system, etc. Pipe _cc781905-5cde- 3194-bb3b-136bad5cf58d_ Diameter is 15.88Φ - Diameter of fin is 15.88Φ ~2 Silver 450mm Left/Right _cc781905-5cde-3194-bb3b-136ba5 Other than 2m

3. Double heat pipe (Patent 10-1513294)

The outside is a heat pipe and the inside is a general pipe. The inside penetrates the center

Seal one side according to the purpose and inject the appropriate liquid_cc781905-5cde-3194- bb3b-136bad5cf58d_ Functionality

also used as a heat pipe.

◎It is used for cooling, but when used regardless of the regenerative heat pipe or horizontal _cc781905-5cde-3194 -bb3b-136bad5cf58d_ _cc781905-5cde-3194- I like to use it

4. Heat pipe for LED

In LED, nano emits heat to the outside and takes it away when the temperature is lowered.

Serves as a heat sink.

◎Heat pipe located at the center of the heat sink required for LED cooling

The lower part of the module is the same as the LED module to collect heat, and the heat is collected by the heat pipe in the center.

If you move it upward and deliver it to the heat sink, it becomes a high-efficiency cooling device.

5. External heat pipe (Patent 10-2037492)

For cooling, the heat collecting area is enlarged to supply a lot of heat that can be cooled.

◎ Absorbs more heat from system cooling to increase cooling efficiency_cc781905-5 -bb3b-136bad5cf58d_

6. Vacuum-free heat pipe (Patent 10-1456199)

It has the advantage of being able to bend freely. It's a hose, not a metal.

◎ When applied to mat products and used as a working fluid by dispersing germanium powder, far infrared rays or terahertz

wave energy of energy You can make a mat.

7. Flat heat pipe (Patent 10-1558333)

3mm It is a flat plate type with a thickness of right and left and is used for cooling devices and heat dissipation.

◎It is good for cooling LEDs and cpu, and it is excellent for heat dissipation of sitz baths and foot baths 3b-136ba5bcf58d_136ba-3194-bb58d_cc781905-5cde-3194-bb3b-136bad5cf58d.

A finned flat plate heat pipe is used as a radiator.